Laguna Tools MCNC Creator Pro I-24P, Manual

Page: 10 / 66

MCNC Creator Pro I-24P
10
6. Keep the electrical cord away from sharp edges, heat or moving parts, and do not store
materials on top of it. Position the cord so it will not become a tripping hazard.
7. While the use of an extension cord is discouraged, if it is necessary verify the cord is in good
condition, meets the current requirements, and is located so as not to present a tripping
hazard.
1.3.4 Additional Safeguards
1. Remove and store adjusting keys and wrenches before turning on the power. If necessary for
visibility, apply safety markings to adjusting wrenches and keys.
2. Install safety guards consistent with general shop safety practices. Always keep safety
guards in place when the machine is in use. If removed for maintenance purposes, use
extreme caution, and replace the guards immediately after completion of maintenance.
3. Check damaged parts immediately. Before further use of the machine, a guard or other part
that is damaged should be carefully checked to determine that it will operate properly and
perform its intended function.
4. Keep visitors a safe distance from the work area. Keep children away.
5. Control liquids in the shop to limit the possibility of spillage that can damage the machine and
potentially cause damage or personal injury from electric shock or fire. Never use the table to
apply or dry finishes.
1.3.5 Maintenance
1. Establish a weekly and monthly maintenance checklist and follow it diligently.
2. Routine maintenance should include periodic checks for alignment of moving parts,
looseness, or binding of moving parts, worn or bare wires, breakage of parts, skewed
mounting, and any other conditions that may affect its operation or cause injury. Analyze
breakage or damage to determine the cause and take appropriate remedial action.
3. Do not operate the machine if a component of the control system is damaged. It should be
properly repaired or replaced before use.
4. Follow instructions for lubricating and changing accessories.
5. Store maintenance tools and supplies nearby, consistent with the shop maintenance
practices and resources.