8 MAINTENANCE AND SERVICE
122
TITAN VERSA Operations and Maintenance Manual
LACO Technologies
Maintenance and Service
CAUTION:
Risk of injury from improper maintenance work
Maintenance on the TITAN VERSA may only be performed by personnel who
have been authorized by LACO Technologies to execute these tasks.
➔
When handling gases, comply with the applicable regulations and safety
measures.
➔
Helium gas has an asphyxiating effect in large concentrations.
➔
The test objects, fixtures, and fittings must be capable of withstanding the existing
pressure differential for the given test.
➔
Customers must declare all chemicals and gasses that have been in contact with
the TITAN VERSA leak detector when sending the product to LACO for repair or
maintenance. If the device contains pollutants (e.g. radioactive, toxic, caustic, or
biological substances) the unit will likely be rejected.
➔
The power entry module, power supply unit, wiring board, and backing pump
contain parts supplied with a voltage of 50V. During servicing, therefore, it is
necessary to remove the mains plug before opening the device.
➔
Electrical components (circuit boards, integrated circuits, electrical connections)
are sensitive to electrostatic charges. Use anti-static packaging for circuit boards
and Flash-ROM.
➔
If defects arise by disregarding recommended maintenance and protective
measures, warranty claims may no longer be applicable.
➔
LACO Technologies does not accept responsibility and warranty claims
o
if the device is converted, or
o
if the device is operated with accessories that are not listed in the associated
product documentation.
To protect both you and the equipment, protective equipment must always be worn,
including:
•
Safety glasses
•
Latex gloves
•
Ear protection (required only in some cases)
•
Protective masks
