LaCie blue eye pro
Installing Your LaCie blue eye pro
User Manual
page 14
4.2. Connecting the LaCie blue eye
Colorimeter
IMPORTANT INFO:
Before connecting the LaCie blue eye
to your monitor:
✦
Clean the monitor to remove fingerprints and dust.
✦
Install the LaCie blue eye software (see section
4.1. Install-
ing the Software
for more information)
1. Remove the LaCie blue eye colorimeter from the protective
shell by applying downward pressure on the protective shell,
while holding the LaCie blue eye colorimeter with your other
hand. You should hear a “click” noise whenever the LaCie
blue eye colorimeter is removed or placed in its protective
shell (figure A).
2. Incline the monitor by 10° (figure B).
3. With EasyHood installed, simply unfold the hook to attach
your calibrator. If no hood is installed, position the LaCie
blue eye colorimeter and cable counterweight. The LaCie
blue eye colorimeter should be flush against the monitor’s
screen (figure B).
4. Connect the LaCie blue eye colorimeter’s USB cable to an
available USB port on your computer (figure C).
TECHNICAL NOTE:
You may attach the LaCie blue eye colo-
rimeter to powered USB hubs.
blue
ey
e
10°
321
Fig. A
Fig. B
Fig. C
