LaCie Biggest S2S
User Manual
page
Using Your Biggest S2S
The configured volume must be partitioned for use
by the Windows operating system before you can begin
using it.
The following example describes the procedures re-
quired to partition a volume. Microsoft Windows al-
lows you to further segment the configured volume into
smaller logical drives, if desired.
Note that when you reconfigure a volume, you must
first delete previously-defined partition(s).
To partition a volume
Review the
Configure JBOD
section configuration.
This example uses the JBOD storage policy for creat-
ing a volume for each hard disk drive.
Right click your
My Computer
icon and select
Man-
age
from the pop-up window. From the
Computer
Management Window
select
Disk Management
under Storage to open
Windows Disk Manager
.
1.
2.
4.4.3. Partition Configured Volume
4.4.3.1. Windows Users
3. Right click on the configured disk’s unallocated space
and select
New Partition
. If they new partition op-
tion is not available, select the disk and initialize it
first.
