LaCie Biggest S2S
User Manual
page
Using Your Biggest S2S
10. Select the
FAST
radio button in the Storage Policy
section.
11. Select the
Use
check box beneath both Drive 0 and
Drive 1. This example illustrates two-drive striping.
12. Move the slider beneath Drive 0 all the way to the
right to allocate the remaining capacity on the two
drives to the Fast volume.
If you wish, you can allocate less than the total re-
maining capacity to the new volume. However, do-
ing so makes the unallocated capacity unavailable
and unused.
13. Click
Update Volume
.
14. Click the Create a New Volume toolbar button.
15. Select the
BIG
radio button in the Storage Policy
section.
16. Select the Use check box beneath Drive 2, Drive 3,
and Drive 4 to allocate all of the remaining system
capacity to the BIG volume.
17. Click
Update Volume
.
ImpOrTANT INfO:
Only the last Volume
listed (in the above example, Volume 2) can be ed-
ited. In order to edit Volume 1, Volume 2 must be
deleted. In order to edit Volume 0, all Volumes
must be deleted and the end-user will need to start
with a New Volume.
