LaCie Biggest S2S
User Manual
page
Using Your Biggest S2S
4.4.1.4. Configure Big
The Basic Configuration Mode implements the Big
storage policy by concatenating all the hard disk drives
into a single volume. Before reconfiguring the Biggest
S2S, delete previously defined partitions. See 4.4.3.
Par-
tition Configured Volume
, for details.
To create a Big volume
To open the Configuration Mode, select
Configure
Box
in the Edit menu or the corresponding button in
the Status window.
Select the
Big
radio button from the Configuration
Mode frame.
1.
2.
3. A confirmation box appears. Because the Basic Con-
figuration Mode affects all hard disk drives, a con-
figuration change may result in total data loss. Click
Yes
to complete the configuration.
TeChNICAl NOTe:
The volumes table below
the Storage Policy frame lists the volume label,
implemented storage policy and size.
4. Select
Save to Config File
from the File menu or
click the button in the toolbar to save the configura-
tion.
5. Click
OK
to build the configuration and close Con-
figuration Mode window. This configures the drives
using the Big storage policy. Within a minute, the
Status window will reflect the implemented Big
storage policy configuration.
6. Partition the configured volume to complete the im-
plementation. See 4.4.3.
Partition Configured Vol-
ume
, for details.
