LaCie Biggest S2S
User Manual
page
Using Your Biggest S2S
4.4.1.1. Configure JBOD (Bypass)
In a JBOD configuration, each physical disk is in-
dependent and is mapped completely to its logical vol-
ume.
To create a JBOD volume
To open the Configuration Mode, select
Configure
Box
in the Edit menu or the corresponding button in
the Status window.
Select the
JBOD
radio button from the Configura-
tion Mode frame.
1.
2.
TeChNICAl NOTe:
The volumes table below
the Storage Policy frame lists the volume label,
implemented storage policy and size.
3. A confirmation box appears. Because the Basic Con-
figuration Mode affects all hard disk drives, a con-
figuration change may result in total data loss. Click
Yes
to complete the configuration.
4. Select
Save to Config File
from the File menu or
click the button in the toolbar to save the configura-
tion.
5. Click the
OK
button to build the configuration in
the Configuration Mode window. This configures the
drives using the JBOD storage policy.
Within a minute, the Status window will reflect the
implemented JBOD storage policy.
6. Partition the configured volume to complete the im-
plementation. See 4.4.3.
Partition Configured Vol-
ume
, for details.