18
To fully and safely exploit the new PRO POWER ARM 2.0, these are to be used together with the SAFETY ARMS (PR-P-
SA) especially in cases where you work with a different starting point, with high load, near the maximum repetition or in
anticipation of exhausting workouts to failure.
For this reason, a pair of safety arm protections [17] was introduced inside the package, designed to be installed on all
models starting from 2020, and already present in the latest 2022 models.
The function of this terminal, made of high quality rubber, is to prevent contact between the metal parts of the power arm
and safety arm, allowing the latter to become a solid selector for starting points on which it is possible to load more weight
and , if necessary, drop in greater safety (which is not possible with the configuration with pin only already mentioned on
page 16).
To install these components, simply replace the rectangular plate at the end of the safety arm with the rubberized
protection using the same bolts.
n 5
x1
NOTE:
In case of possession of safety arm models prior to 2020, the rubberized protection can still be
positioned. In this case we recommend that you fix it at the end with a strong double-sided tape.
The rubber terminal allows the
safety arm to become a selector
for the starting point on which it is
possible to place more load!
