6
Due to dimensions and weight, the tool must be assembled in the place where it will be used.
Having identified the place of installation, position the package \in the direction indicated by the arrows printed on the sides of the
box.
To open, cut any strapping tapes with scissors and remove any closing metal staples with pliers.
Carefully remove the product from the box. Arrange all components and check that all parts are present and undamaged. In case of
missing or damaged parts, contact
.
The product is packed disassembled into several parts so as to take up little space; in order to use the product, it must be assembled
by referring to the steps shown on the following pages.
ENVIRONMENT CHARACTERISTICS:
- Covered and wide enough;
- Equipped with suitable artificial and/or natural lighting;
- Equipped with one or more ventilation openings,
The product must NOT be installed outdoors, in damp rooms or places exposed to a saline atmosphere.
CHARACTERISTICS OF THE FLOOR:
The suitable surface on which to place the product must be:
- Perfectly level
- The area must be free from anything that could be dangerous.
- Suitable to support the weight of the product during normal conditions of use and installation
- Free of dirt, dust or other foreign materials that could affect the assembly of the product.
PREPARING THE ROOM FOR ASSEMBLY OPERATIONS:
Before proceeding with the assembly, make sure you have a large space available in which you can perform the operations safely
and easily. Ample space will also be required after the product has been assembled and installed so that it can be used without
hindrance or difficulty.
To facilitate recognition of the components during assembly, it is advisable to place the contents of the packaging on the ground,
after having covered the ground with sheets, cardboard or other protective materials in order to avoid damaging the underlying
flooring.
ATTENTION:
The metal surface of parts and hardware may be coated with a thin layer of lubricant or grease, which is needed to
protect the components from rusting. In order to avoid dirtying parts of the furniture and the surrounding environment,
avoid placing the pieces of the product on objects such as chairs, carpets, furniture or precious flooring...
ATTENTION:
It is not recommended to install the product in the presence of flooring made with precious materials (e.g. parquet);
otherwise it is recommended to protect the flooring by placing protective material in the contact points (e.g. rubber
flooring).
ATTENTION:
The packaging is made of recyclable material; for the disposal of the packaging, refer to and comply with the local
regulations in terms of separate collection for the recovery of recyclable and non-recyclable materials.
The packing elements (cardboard and bags) must not be left within the reach of children and/or animals, as they are
potential sources of danger.
