Chapter 3: Getting Started
Product Service 1-800-522-7658
10
Original instructions
IF YOUR RAPIDVAP WAS DAMAGED IN TRANSIT, YOU
MUST FILE A CLAIM DIRECTLY WITH THE FREIGHT
CARRIER. LABCONCO CORPORATION AND ITS DEALERS
ARE NOT RESPONSIBLE FOR SHIPPING DAMAGES.
Do not discard the carton or packing material for your RapidVap until you have
checked all of the components and installed and tested the RapidVap.
RapidVap Components
As previously mentioned, Labconco manufactures two types of RapidVap, the
Vacuum and the Nitrogen models. Each model is available in 115V or 230V.
The different RapidVap models require different assembly components. Locate
the model of RapidVap you received in the following tables. Verify that the
components listed are present and undamaged.
Catalog #
RapidVap Description
79000-00
RapidVap Vacuum System – 115V
79000-01
RapidVap Vacuum System – 230V
79000-02
RapidVap Vacuum System – 115V with lid heater
79000-03
RapidVap Vacuum System – 230V with lid heater
79000-10
RapidVap Vacuum System – 115V with RS 232 Interface
79000-11
RapidVap Vacuum System – 230V with RS 232 Interface
79000-12
RapidVap Vacuum System – 115V with lid heater with RS 232 Interface
79000-13
RapidVap Vacuum System – 230V with lid heater with RS 232 Interface
Plus the Following:
Part #
Component Description
78286-04
Hose - Vacuum
14888-00
Two (2) Clamps
13364-00
13365-00
Power Cord – 115V
or
Power Cord – 230V
19116-00
Washer (3)
19092-21
Acorn Nut (3)
12556-00
Heat Transfer Grease
74901-00
User’s Manual
74848-00
Cable Assembly RS232 (Models 79000-10, -11, -12, -13)
