Chapter 4: Lyo-Works Operating System
Product Service 816-333-8811 or 1-800-522-7658
32
Original instructions
Drying Accessory Screen
If an electrically controlled Drying Accessory is NOT connected to the Freeze
Dryer (via the communication cable), the Drying Accessory icon will NOT appear
in the main menu bar. If one of these accessories has been properly connected to
the Freeze Dryer, the Drying Accessory icon will appear in the main menu bar and
you will be able to control and monitor the Drying Accessory from this screen.
Dryer Accessory Sensor Table
– The middle section of the screen displays a
list of all the sensors that are available for the connected Drying Accessory.
Sensors that are disconnected will have three dashes (---) for their value.
Drying Accessory Status Box
– The status box is located directly below the
sensor table. The text on the left side will indicate the current operation mode
of the Drying Accessory (OFF, Manual, or Program). When in Manual mode,
the word “Manual” and the current Shelf Temp Set Point value will be
displayed in this location. If a program is running the program name, Step #,
and Time Remaining (TR) in the current Step will be displayed in this location.
The right side of the status box will indicate if Data Logging is currently ON or
OFF.
PROGRAM
– Pressing this button will take you to the Programs
screen, where you can create a new program, or start, edit, view, copy
or delete a saved program.
MANUAL
– Use this button to enter a Shelf Set Point Temp and/or
start the Drying Accessory in manual mode.
