Chapter 3: Getting Started
Product Service 816-333-8811 or 1-800-522-7658
9
Original instructions
DO NOT DISCARD THE CARTON OR PACKING MATERIAL FOR
YOUR FREEZE DRYER UNTIL YOU HAVE CHECKED ALL OF
THE COMPONENTS AND INSTALLED AND TESTED THE FREEZE
DRYER.
Freeze Dryer Components
Verify that the components listed below are present and undamaged.
(1)
Freeze Dryer
(1)
Collector Chamber Lid Assembly
o
Acrylic Lid Assembly for -50C models
o
Stainless Steel Lid Assembly for -84C models
(1)
Mini Chamber Lid (if equipped)
(1)
Shell Freezer Lid (if equipped)
6L
12L 18L
Part #
Description
Comments
1
1
1
1089005
User’s Manual
USB Flash Drive
1
1
1
Power Cord
See parts list (Appendix A)
1
1
1
7373436
Vacuum Hose
2
2
2
1488800
Hose Clamp
1
7213200
Baffle 6L (SSTL)
-84C SSTL Models
1
7213201
Baffle 6L (PTFE)
-84C PTFE Models
1
7213300
Baffle 12L (SSTL)
-84C SSTL Models
1
7213301
Baffle 12L (PTFE)
-84C PTFE Models
1
7390700
Baffle 18L (SSTL)
-50C SSTL Models
1
7390703
Baffle 18L (Polypro)
-50C PTFE Models
1
1
1
7205304
Drain Hose
If you did not receive one or more of the components listed for your Freeze Dryer,
or if any of the components are damaged, contact Labconco Corporation
immediately for further instructions.
Setting Up Your Freeze Dryer
After you verify receipt of the proper components, move your Freeze Dryer to the
location where you want to install it. Then, follow the steps listed below.
