32
Product Service Domestic 1-800-522-7658, International 816-333-8811
Chapter 6: Modifying Your CentriVap
Installing a CentriZap™
Strobe Light
An accessory strobe light is available to enable you to
see the samples as they are rotating in the rotor. Attach
the holder to the right hand side of the CentriVap
Concentrator using the screws provided. Plug the
connector on the strobe light harness into the receptacle
on the back of the CentriVap marked “STROBE
OUTLET.” Peel the protective backing off the
enclosed Velcro® and attach it to the back of the
Concentrator. Secure the power supply box on the
harness to the Velcro. Place the light in the holder.
To use the strobe light while the CentriVap is operating,
remove the light from its holder, press the trigger and
shine the light on the samples in the rotor.
Box secured
with Velcro
Screws
Holder
Plug wire into
“Strobe” receptacle
