17
Product Service Domestic 1-800-522-7658, International 816-333-8811
Chapter 3: Getting Started
Solvents used in the CentriVap may
be flammable or hazardous. Use
extreme caution and keep sources of
ignition away from the solvents.
When using flammable or hazardous
solvents, both the CentriVap and the
vacuum pump should be operated
inside a fume hood.
If a sample is spilled in the chamber it
must immediately be cleaned up.
Hazardous materials such as strong
acids or bases, radioactive substances
and volatile organics, must be handled
carefully and promptly cleaned up if
spilled.
Do not store flammable or hazardous
solvents within 12 inches (300 mm) of
the CentriVap.
Several components of the CentriVap
which are located inside the chamber
are made of stainless steel which can
be attacked by acids. Use of acids
such as trifluoroacetic acid can result
in degradation of the product and the
vacuum pump. Use care when using
aggressive liquids which can damage
the CentriVap and thoroughly clean
the CentriVap after each use. Contact
Labconco before evaporating acids.
WARNING: The disposal of
substances used in connection with
this equipment may be governed by
various Federal, State or local
regulations. All users of this
equipment are urged to become
familiar with any regulations that
apply in the user’s area concerning
the dumping of waste materials in or
upon water, land or air and to comply
with such regulations.
