English
49
www.lamarzocco.com
Version 1.3
GB/5 - FB/80
Description
Firenze - Italia
Operating Procedure
EE Accessing Programming Mode
EE Programming Mode
LaMarzocco 09:30
•
To change any configurable parameter the operator
must first enter into the programming mode.
•
There are two levels within the programming mode
that allow the restriction of specific parameters
depending upon procedure entered.
The two programming levels are as follows:
•
Barista Level
. Limited parameters are available.
•
Factory Level
. Technician level parameters plus
additional parameters are available.
Barista Level
Factory Level
Press and hold the tea button and turn on the
main switch (1 position/On postion) until the first of
the following menu appears:
2
Turn off the main-switch (O position/ Off position)
1
COFFEE BOILER T
CUP HEATING
TOTAL COFFEE
TOTAL TEA
LANGUAGE
TEMPERATURE C/F
CRONO FUNCTION
(AVAILABLE FROM THE 1.06
SOFTWARE VERSION)
USER NAME
OFF
1
2
3
4
5
6
7
8
9
Press and hold the first and the second brew
button from the left and turn on the main switch (1
position/On postion) until the first of the following
menu appears:
2
Turn off the main-switch (O position/ Off position)
1
COFFEE BOILER T
CUP HEATING
TOTAL COFFEE
TOTAL TEA
LANGUAGE
TEMPERATURE C/F
CRONO FUNCTION
(AVAILABLE FROM THE 1.06
SOFTWARE VERSION)
USER NAME
TEMPERATURE CORRECTION
FILLING UP
TEA WATER FILLING
GROUP NUMBER
KP KI KD
PID RANGE
HEATING TIME OUT
LEVEL PROBE DELAY
LEVEL TIME OUT
OFF
1
2
3
4
5
6
7
8
9
10
11
12
14
13
15
16
17
18
When finished, scroll through the OFF parameter with the tea button and push any BREW BOTTON to turn the machine ON.
Parameters description: See the Table of Contents of AV Model
The parameters are the same of the AV Model, the only difference is the use of the push buttons as described on
previous page.
Software Programming Manual - ENG - V 1.3.pmd
30/10/2006, 14.39
49
