English
Firenze - Italia
Description
Display
Operating Procedure
20
La Marzocco, S.r.l. Firenze, Italia
Version 1.3
Water Volume Programming
Barista Level Parameters
•
This parameter allows the operator to program the
water volume (shot volume) for the individual buttons
on the keypad.
•
The saved program is a number. This number
relates to the number of pulses the flowmeter
delivers to the CPU. Once the programmed number
of pulses is received by the CPU, the flow of water is
stopped.
Water Volume
Programming
LaMarzocco 09:30
Press and hold the
button on the group 1 keypad until the following is displayed
(approximately 5 seconds):
Press the
button on the group 1 keypad again. The lights on the first 4 buttons will light and
the light on the continuous button will begin flashing. The flashing light indicates the keypad is in
programming mode
1
2
While in programming mode, press any of the first 4 buttons. When the desired amount of water
has been dispensed, press the same button again to stop the flow of water. Continue this same
procedure for all buttons that programming is desired.
3
Once the first 4 buttons are programmed, press the
button to exit programming mode
4
NOTE:
The programming completed for group 1 keypad will be copied to all subsequent keypads.
If other programming is desired for subsequent keypads, follow procedure 1 and 2 substituting the
subsequent group keypad number for procedure 2.
ON
OFF
Water Volume
Programming
ON
OFF
To program the tea water dispense button, repeat procedure 1 then press the
button on
the corresponding keypad that you wish to program. When the light begins
to flash, press
the button. When the desired amount of water has been dispensed,
press the button
again to stop the flow of water. When finished
press the button to exit programming mode.
5
Software Programming Manual - ENG - V 1.3.pmd
30/10/2006, 14.39
20
