English
Firenze - Italia
Description
Display
Operating Procedure
18
La Marzocco, S.r.l. Firenze, Italia
Version 1.3
Steam Boiler Level Timeout
Factory Level Parameters
•
This parameter is a safety parameter designed to
turn off the machine when the steam boiler does not
fill to the correct level within the programmed time
interval.
•
This parameter consists of one value. The value is
measured in minutes.
•
The machine will shut down and display the error
message: “Steam Boiler Timeout” when the steam
boiler does not reach the preset level within the
programmed time interval.
•
This parameter is set at the factory and should not be
changed.
•
Incorrect values for this parameter could disable the
safety protection provided by this parameter.
Password
?????
LaMarzocco 09:30
Groups Number
3
Level timeout
20 min
Press and hold the
button on the group 1 keypad until the following is displayed
(approximately 10 seconds):
Enter the 5 digit factory password using buttons 1-5 on the group 1 keypad. Once accepted the
following appears:
1
2
Press the
button on the group 1 keypad until the following appears (about nine times):
3
Press the
or the
button to change the value of the flashing parameter. When the desired
value is displayed press the button
to confirm the value.
4
MODE
+
When finished, continue to the next parameter or press
to exit programming mode.
5
ON
OFF
Level timeout
20 min
MODE
Software Programming Manual - ENG - V 1.3.pmd
30/10/2006, 14.39
18
