English
Description
Firenze - Italia
Display
Operating Procedure
13
www.lamarzocco.com
Version 1.3
GB/5 - FB/80
Factory Level Parameters
Autosteam
Autosteam
DISABLED
•
Autosteam is an option that may be ordered from the
factory.
•
Autosteam is a process that monitors the
temperature of milk while steaming and shuts off
when the milk reaches the preset temperature.
NOTE:
Autosteam option contains many components.
Setting the value to ENABLED without the complete
assembly will result in an error message on the display
•
When incorrectly configured or when there is a
problem with the Autosteam the error message,
“Autosteam 1 Temperature” is displayed (where the
number 1 indicates which Autosteam is effected).
Password
?????
Press and hold the
button on the group 1 keypad until the following is displayed
(approximately 10 seconds):
1
LaMarzocco 09:30
Enter the 5 digit factory password using buttons 1-5 on the group 1 keypad. Once accepted the
following appears:
2
Groups Number
3
3
Press the
button on the group 1 keypad until the following appears (six times):
MODE
Autosteam
DISABLED
When finished, continue to the next parameter or press
to exit programming mode.
5
ON
OFF
Press the
or the
button to change to ENABLED or DISABLED. Once the desired
condition is displayed press the
button to confirm.
5
+
ENTER
Software Programming Manual - ENG - V 1.3.pmd
30/10/2006, 14.39
13
