La Cimbali S39 Dolcevita 2, Use And Installation

Page: 48 / 172

English
12 EN
12. Dispensing of beverages - Coffee
GENERAL INFORMATION
Place the cup (or cups) under dispenser ( 1 ) of the required
group.
Adjust the height of the dispenser (
1 ) if necessary.
Press the coffee dispensing key relative to the selected
dose. The led of the selected key lights up and dispensing
commences.
Dispensing stops automatically.
Delivery of powdered coffee for machines without
automatic dosers
After having positioned the cup under the spout,open the
decaffeinated coffee panel (
18 ) and measure out a dose
of powdered coffee into the tube and close the powdered
coffee panel (
18 ). The leds relative to the keys programmed
for one cup located on the display panel ( 3 ) will blink.
Also, keys in second selection and special key will blink
alternatively if programmed (see paragraph
"Special
function" on the following pages).
Press one of the keys associated to the ignited leds that
corresponds to the desired dose.
Delivery terminates automatically.
Coffee STOP function
Use " OK " key to stop coffee dispensing before the
programmed dose has been reached.
NOTE: use of the "OK" button will not modify the
programmed parameters.
SECTION REPETITION Function
This function can be activated in various ways:
1) Press any one of the selection keys and after about 3
seconds press the same key again for the number of
dispensed drinks required.
The number of dispensed drinks programmed is
indicated on the top left of the display. Press the " OK "
key and keep pressed for about 3 sec. to reset.
2) Setting the desired number at the repeats entry in the
beverage recipe (see CLIENT PROGRAMMING and
paragraphs referring to
Key Menu ).
NOTE: These functions are deactivated when error
messages and/or codes are displayed and the
item “Program. block” is set on “YES".
18
1
OK
3 3
02_S39DV2.indd 12 18/06/2014 15:15:28