14221-1800-2050, Rev. G
51
5.18 PTT OPTIONS
The radio can be programmed via RPM2 with one of the following PTT options:
•
Radio and Accessory - In this mode, when the radio is PTTed, the audio source will
correspond with the PTT source.
If the source of PTT is radio, the audio is routed via the radio microphone.
If the source of PTT is an external microphone accessory, the audio is routed via the
external microphone accessory.
•
Accessory Only - Any PTT input will have the audio routed through the external microphone
accessory.
The Bluetooth Speaker Mic is unaffected by this setting. PTTing the Bluetooth
Speaker Mic always results in audio being routed via the Bluetooth Speaker Mic.
5.19 VOICE ANNUNCIATION
When enabled via programming, Voice Annunciation provides audible feedback for various radio
operations. The radio can be programmed to play an audio message for any or all the following.
This message can be a pre-recorded (canned) message or a user-recorded message.
•
Zone changes
•
Channel changes
•
System changes
•
Encryption On/Off
•
Noise Cancellation On/Off
•
Scan On/Off
•
Talkaround On/Off
•
Monitor Mode On/Off
•
Two or Four Position switch change
For more information on configuring the radio for Voice Annunciation, refer to the
Voice
Annunciation Feature Manual
14221-7200-6110.
NOTE
