14221-1800-2050, Rev. G
8
1. REGULATORY AND SAFETY INFORMATION
1.1 SAFETY CONVENTIONS
The following conventions are used throughout this manual to alert the user to general safety
precautions that must be observed during all phases of operation, service, and repair of this
product. Failure to comply with these precautions or with specific warning elsewhere in this
manual violates safety standards of design, manufacture, and intended use of the product.
L3Harris assumes no liability for the customer’s failure to comply with these standards.
The WARNING symbol calls attention to a procedure, practice, or the like,
which, if not correctly performed or adhered to, could result in personal
injury. Do not proceed beyond a WARNING symbol until the conditions
identified are fully understood or met.
The
CAUTION
symbol calls attention to an operating procedure, practice, or the
like, which, if not performed correctly or adhered to, could result in damage to the
equipment or severely degrade the equipment performance.
The
NOTE
symbol calls attention to supplemental information, which may improve
system performance or clarify a process or procedure.
1.2 OVER-TEMPERATURE CONDITION
When the radio reaches an internal temperature of 102°C, the high temperature alarm sounds.
Alerts are indicated via the LED, an
OVERTEMP
alert on the display and voice announcements.
The radio must be removed from service after an over-temperature condition.
1.3 RATED TRANSMITTER RF OUTPUT POWER
FREQUENCY
RATED RF POWER OUTPUT
VHF
6.0 W (5.0 W in Hazard Mode)
UHF
5.0 W
700 MHz
3.0 W
800 MHz
3.0 W
WARNING
CAUTION
NOTE
