14221-1800-2050, Rev. G
56
4. Press the Menu/Select button to change
T99 TOGGLE
between
ENABLED
and
DISABLED
.
T99
is displayed in the top of the radio display when Type 99 is enabled.
Or
A button or switch can be programmed to enable/disable Type 99 (see Section 7.5).
5.24.2 Disable After PTT
If this option is programmed using RPM2, Type 99
is disabled after the radio user activates the
PTT. This allows the radio user to monitor traffic on the channel (after a PTT action) without
pressing the monitor button.
Can be used in conjunction with the “Auto Reset” option (see Section 5.24.3) to disable Type 99
after a PTT and automatically reset, or enable, Type 99 after 30 seconds.
5.24.3 Auto Reset
If this option is programmed using RPM2, Type 99 is automatically reset, or turned back on, after
30 seconds.
Can be used in conjunction with the “Disable After PTT” option (see Section 5.24.2)
to disable Type 99 after a PTT and automatically reset, or enable, Type 99 after 30 seconds.
5.25 CALL ALERT (PAGE)
5.25.1 Send Alert
To send an alert:
1. Press the Menu/Select button to access the main menu.
2. Press the left or right navigation buttons to display the
CALL
menu.
3. Press the up or down navigation buttons to highlight
CALL ALERT
and press the Menu/Select
button.
4. Press the up or down navigation buttons to highlight the desired unit from the list and press
the Menu/Select button, or select
KEYPAD
to enter the Unit ID.
5. Press
PTT
to send the page.
5.25.2 Receive Alert
1. When receiving a Call Alert, the radio displays the calling radio’s name or Unit ID.
2. The radio rings and indicates a missed call. The ring sounds continuously until you press PTT,
press the
CLR MISSED
softkey, change group/system, or power cycle the radio.
