14221-1800-2050, Rev. G
58
5.28 AUDIO PLAYBACK
The Audio Playback feature allows the user to playback a previously received call. Recordings
are stored in the radio’s RAM and are not persistent across power cycles. The radio stores the
last five recorded calls, up to one minute each.
A button on the radio can be programmed to replay the last recorded call. To playback the last
received call from a button:
1. Press the button programmed for audio playback. The last call received before the button was
pressed is played each time the button is pressed.
2. Additional incoming calls will be recorded in the background, but pressing the button continues
to replay the captured call until reset.
3. To reset the feature and allow a new call to be captured, press and hold the button until you
hear a two-tone chirp. At this point, the button can be used to capture a new incoming call.
You can also playback one of the last five calls received via the menu.
To playback a previously received call from the menu:
1. Press the Menu/Select button.
2. Press the left or right navigation buttons to display the
CALL
menu.
3. Press the up or down navigation buttons to highlight
AUDIO PLAYBACK
and press the
Menu/Select button.
4. Select the desired call from the list (the most recent call is at the top of the list) and press the
select button. The selected call will be played.
•
If a button is also programmed for Audio Playback, pressing the button replays the call
selected in the menu. The feature must be reset as above to use the button to capture a
new call.
•
If a button is not programmed for Audio Playback, navigate back to the menu to play the
call again.
Any incoming call that occurs during playback preempts the playback.
NOTE
