14221-1800-2050, Rev. G
105
7.5 PROGRAMMABLE BUTTONS AND SWITCHES
7.5.1 Programmable Buttons
Press the down navigation button while on the main display to view the functions assigned to the
programmable buttons. The programmable buttons are programmed using RPM2. A delay of 0 to
10 seconds can be defined using RPM2 for the programmable buttons. Table 7-2 lists and
describes the functions that can be programmed to the buttons:
Table 7-2: Programmable Button Options
FUNCTION
DESCRIPTION
No Operation
Adjust Squelch
Allows the user to adjust the analog squelch level using the 4/Left and 6/Right
buttons.
Audio Playback
Accesses the AUDIO PLAYBACK menu. See Section 5.28.
Bluetooth
Enable/Disable
Enable/disable Bluetooth. See Section 6.10.
Button Info
Opens the Programmable Button Info Menu. Button Info is assigned to the Key Down
button by default.
Caller ID
Opens the Caller ID menu. When a Missed Call Alert is shown on the radio display,
pressing the Key Up button on the radio opens the CALLER ID menu irrespective of
the functionality assigned to the Key Up button.
Channel Guard Override Allow user to pick a different Channel Guard setting for the current channel.
CMD Mute
Mutes all audio. Audio remains muted until this button is pushed again or until an I-
Call is received by the radio.
Direct System/Zone
Entry
Allow user to select system/zone.
Drop Call
Drop or terminate any group call that the radio receives.
Editable Preset
When this button is pressed and held for four (4) seconds, the radio saves the
currently selected system/group or zone/channel to this button.
When this button is pressed and released in less than four (4) seconds, the radio
changes to the user-saved system/group or zone/channel if already saved by the
user.
If system/group or zone/channel is not configured for this button, when user defined
preset button is pressed and released in less than four (4) seconds, the radio displays
“Preset Empty.”
Emergency Check In
Timer
When this button is pressed, the Emergency Check In Timer is activated. See Section
6.22 for more information.
Fixed Preset
When this button is pressed and released, the radio changes to the system/group or
zone/channel specified in RPM2.
Flashlight Mode
Press and hold to turn on the front and top display backlights. Release the button to
turn off both displays.
Front Backlight
Toggles front display’s backlight On/Off/Momentary.
Home
Goes to home channel.
Individual Call
Initiate an Individual Call.
Lock Keypad
Locks the DTMF keypad, programmable function keys and navigation keys.
Monitor Toggle
Toggles Monitor On/Off.
Monitor/Clear
Temporarily turn off selected squelch to monitor for traffic that may not normally break
squelch. Also, press this button followed by the emergency button to clear an
emergency.
