L3 comminications SERIES 5000, Operation And Maintenance Manual

Page: 89 / 283

4-30
CHAPTER 4 SonarPro Ver. 11.0 Operating Instructions
Series 5000 Sonar System Operations and Maintenance Manual P/N 11210060, Rev. 13.0
4.13.1 Setting up the Navigation Window Properties
Right-click in the Navigation Window to open the Navigation Properties dialog
box to the General tab as shown in Figure 4-39.
On the General tab you can make the following selections:
• Select
Display Lat/Lon Lines
to display the latitude and longitude
lines.
• Select
Display Survey Route
to display the survey route.
• Select
Auto Track
to have the Navigation window re-center on the
sonar coverage track automatically when it goes off the edge of the
window. You can also use the
Drag Tool
button at the top of the
window to re-center it manually.
• Select
Display Compass Rose
to place a compass rose
icon in the upper right corner of the Navigation window
for orientation. The compass rose is used with the C-MAP
charts.
• Select
Display Sonar Swath
to display sonar swath lines. When
not selected, the survey route is displayed as a dotted line.
• Click
Erase Outlines
to erase any outlined targets.
• Click
Erase Tracks
to erase the sonar collection track.
• Select
No Charts
to not display a chart.
• Select
Maptech Charts
to display Maptech charts.
• Select
CMAP Charts
to display C-MAP charts. When this option is
selected, the
Manage C-MAP Charts
and
Manage C-MAP Licenses
buttons become available.
Figure 4-39:
The Navigation Properties Dialog Box—General Tab