manualshive.com logo in svg

L3 comminications SERIES 5000, Operation And Maintenance Manual

The L3 Communications SERIES 5000 is a cutting-edge product designed to enhance communication systems. For a comprehensive understanding of its operation and maintenance, download the free Operation and Maintenance Manual from our website. This invaluable resource provides step-by-step instructions and guidelines for optimal use.

Share
Download
background image

xxiii

EXPORT RESTRICTIONS:

  You agree that you will not export or re-export the 

Software or accompanying documentation (or any copies thereof) or any products 
utilizing the Software or such documentation in violation of any applicable laws or 
regulations of the United States or the country in which you obtained them.

TRADE SECRETS; TITLE:

  You acknowledge and agree that the structure, 

sequence and organization of the Software are the valuable trade secrets of L-3 
KLEIN. You agree to hold such trade secrets in confidence. You further 
acknowledge and agree that ownership of, and title to, the Software and all 
subsequent copies thereof regardless of the form or media are held by L-3 KLEIN.

UNITED STATES GOVERNMENT LEGEND:

  All technical data and 

Software are commercial in nature and developed solely at private expense. The 
Software is delivered as Commercial Computer Software as defined in DFARS 
252.227-7014 (June 1995) or as a commercial item as defined in FAR 2.101(a) and 
as such is provided with only such rights as are provided in this License 
Agreement, which is L-3 KLEIN's standard commercial license for Software. 
Technical data is provided with limited rights only, as provided in DFAR 252.227-
7015 (Nov. 1995) or FAR 52.227-14 (June 1987), whichever is applicable. You 
agree not to remove or deface any portion of any legend provided on any licensed 
program or documentation delivered to you under this License Agreement.

TERM AND TERMINATION:

  This license will terminate immediately if you 

fail to comply with any term or condition of this License Agreement. Upon such 
termination you agree to destroy the Software and documentation, together with all 
copies and merged portions in any form. You may terminate it at any time by 
destroying the Software and documentation together with all copies and merged 
portions in any form.

GOVERNING LAW:

  This License Agreement shall be governed by the laws of 

the State of New Hampshire, USA. You agree that the United Nations Convention 
on Contracts for the International Sales of Goods (1980) is hereby excluded in its 
entirety from application to this License Agreement.

LIMITED WARRANTY; LIMITATION OF LIABILITY:

  All warranties and 

limitations of liability applicable to the Software are as stated in the product 
manual accompanying the Software. Such warranties and limitations of liability 
are incorporated herein in their entirety by this reference.

SEVERABILITY:

  In the event any provision of this License Agreement is found 

to be invalid, illegal or unenforceable, the validity, legality and enforceability of 
any of the remaining provisions shall not in any way be affected or impaired and a 
valid, legal and enforceable provision of similar intent and economic impact shall 
be substituted therefore.

ENTIRE AGREEMENT:

  This License Agreement sets forth the entire 

understanding and agreement between you and L-3 KLEIN supersedes all prior 
agreements, whether written or oral, with respect to the Software, and may be 
amended only in a writing signed by both parties.

Summary of Contents for SERIES 5000




























































































































































































































































































Reviews:

No comments

Related manuals for SERIES 5000

Blueprint Subsea M1200d User Manual preview
M1200d
Brand: Blueprint Subsea Pages: 32
Tritech StarFish Quick Start Manual preview
StarFish
Brand: Tritech Pages: 2

Brands by name

Popular brands

Load more brands