manualshive.com logo in svg

L3 comminications SERIES 5000, Operation And Maintenance Manual

The L3 Communications SERIES 5000 is a cutting-edge product designed to enhance communication systems. For a comprehensive understanding of its operation and maintenance, download the free Operation and Maintenance Manual from our website. This invaluable resource provides step-by-step instructions and guidelines for optimal use.

Share
Download
background image

6-8

   

CHAPTER 6 Splashproof TPU

Series 5000 Sonar System Operations and Maintenance Manual

P/N 11210060, Rev. 13.0

200 VDC power supply.  

The 200 VDC power supply inputs 200 VAC from 

the transformer and provides 200 VDC to power the towfish. In addition, this 
power supply provides data coupling to and from the towfish on the 200 VDC 
power.

Low voltage power supply.  

 The low voltage power supply provides

+5 VDC, +12 VDC and -12 VDC to power the VME chassis. The +5 VDC also 
powers the PWR indicator and the VME fan. This power supply runs 
automatically on 115 or 230 VAC.

12 VDC power supply.  

The 12 VDC power supply pr12 VDC to 

power the optional GPS and the baffle fan. This power supply runs 
automatically on 115 or 230 VAC.

Power fuse.  

The power fuse is in series with the main AC power input, the 

transformer input and the input to the low voltage power supply. It is a 2-A,
5 x 20-mm slow-blow fuse rated for 250 volts (P/N 13000045).

Towfish fuse.  

The towfish fuse is in series with the 200 VDC output of the 

200 VDC power supply. It is a 630-mA, 5 x 20-mm slow-blow fuse rated for 
250 volts (P/N 13000043).

GPS fuse.  

The GPS fuse is in series with the main AC power input and the 

input to the 12 VDC power supply. It is a 1-A, 5 x 20-mm fast-acting fuse rated 
for 250 volts (P/N 13000161). 

Transformer.  

The transformer inputs either 115 or 230 VAC, depending on 

the setting of the VOLTAGE SELECT switch. The transformer output voltage 
is 200 VAC which is input to the 200 VDC power supply. (See CAUTIONS on 
page 6-9 regarding the use of the VOLTAGE SELECT switch.)

Inverter.  

The inverter 12 VDC when the VAC/12 VDC switch is 

switched to 12 VDC and a 12 VDC supply is connected to the 12 VDC 
connector on the connector panel. The inverter output is 115 VAC which 
provides the main AC input power for the TPU. When using +12 VDC to 
power the TPU, the VOLTAGE SELECT switch must be switched to 115V.

Baffle fan.  

The baffle fan provides cooling for the inside of the case.

VME fan.  

The VME fan provides cooling for the VME chassis.

Baffles.  

The baffles allow air to flow out of the case to cool the inside without 

allowing rain or spray inside the case.

Summary of Contents for SERIES 5000




























































































































































































































































































Reviews:

No comments

Related manuals for SERIES 5000

Furuno CH-500 Operator'S Manual preview
CH-500
Brand: Furuno Pages: 109
Eagle Z-6100 Installating And Operation Manual preview
Z-6100
Brand: Eagle Pages: 12

Brands by name

Popular brands

Load more brands