manualshive.com logo in svg

L3 comminications SERIES 5000, Operation And Maintenance Manual

The L3 Communications SERIES 5000 is a cutting-edge product designed to enhance communication systems. For a comprehensive understanding of its operation and maintenance, download the free Operation and Maintenance Manual from our website. This invaluable resource provides step-by-step instructions and guidelines for optimal use.

Share
Download
background image

Targets And Target Management

4-45

The following buttons in the 

Detailed Target Window Management 

dialog box are 

used to manage the target lists. 

One List/Two List.  

Click 

One List

 to change the display to only one list 

called the 

All Targets

 list. In this mode you will not know which targets are 

being displayed, but the list is more suitable for printing. The 

One List

 button 

will change to 

Two List

. Click 

Two List

 to revert to two lists.

Make Visible.  

By selecting a target from the 

Invisible Targets

 list, this button 

will become available. Click the button to move the selected target into the 

Visible Targets

 list and display its Target window in the Main Window.

Make All Visible.  

Click this button to move all of the targets in the 

Invisible 

Targets

 list into the 

Visible Targets

 list and display their Target windows in 

the Main Window. The maximum number of visible targets is 12. 

Make Invisible.  

By selecting a target from the 

Visible Targets

 list, this button 

will become available. Click the button to move the selected target into the 

Invisible Targets

 list and close its Target window.

Make All Invisible.  

Click this button to move all the targets in the 

Visible 

Targets

 list into the 

Invisible Targets

 list and close all the Target windows.

Export Target List.  

Click this button to output the target list to a text file, a 

file of extension 

.txt

, for viewing and printing in word processors.

When a target is selected and made visible, it will 
be identified in the Navigation window as a red 
target with a white center as shown in Figure 4-59.

To edit a target, select the target and click 

Make 

Visible

. Then go to its Target window, make the 

changes and resave the target. To delete a target 
from the target catalog, select the target and click 

Make Visible

. Then go to its target window and 

delete the target.

Figure 4-59:  

Visible Target 

in Navigation Window

Summary of Contents for SERIES 5000




























































































































































































































































































Reviews:

No comments

Related manuals for SERIES 5000

Furuno CHS-5LMARK-2-55 Operator'S Manual preview
CHS-5LMARK-2-55
Brand: Furuno Pages: 90
Reson SeaBat 7125 SV2 Operator'S Manual preview
SeaBat 7125 SV2
Brand: Reson Pages: 212
Reson SeaBat 7125 ROV Operator'S Manual preview
SeaBat 7125 ROV
Brand: Reson Pages: 200

Brands by name

Popular brands

Load more brands