L-Acoustics K3i Owner'S Manual Download Page 7

Page: 7 / 85

Introduction

Introduction

K3i long throw line source for install

K3i is the installation version of K3, designed for long-throw installation applications. K3i shares identical sonic

performance with its touring counterpart but features a sleeker design and streamlined mounting hardware tting

integration requirements.
Housing the internationally recognized K2 performance into a compact enclosure, K3i is ideal for medium to large-scale

venues that require premium-tour sound and limited footprint, such as large concert halls, clubs, congress centers and

sport venues.
Inter-element angles and Panex

™

for user-adjustable horizontal directivity enable integrators, consultants and sound

designers to precisely tailor the array coverage to any audience geometry.
Requiring only two channels of amplication, K3i is a high value solution that provides large-format concert sound in

compact and lightweight construction to facilitate most integration scenarios. K3i is highly weather-resistant as standard

and can be color-matched to melt into any venue decor, indoor or outdoor.

How to use this manual

The K3i owner's manual is intended for all actors involved in the system design, implementation, preventive and

corrective maintenance of the K3i system. It must be used as follows:

Read the technical description for an overview of all system elements, their features, and their compatibilities.

•

Electro-acoustical description

(p.11)

•

Rigging system description

(p.17)

Prepare the system conguration. Consider the mechanical limits and the available acoustical congurations.

•

Mechanical safety

(p.30)

•

Loudspeaker congurations

(p.32)

Before rigging the system, perform mandatory inspections and functional checks.

To deploy the system, follow the step-by-step rigging instructions and refer to the cabling schemes.

•

Rigging procedures

(p.37)

•

Connection to LA amplied controllers

(p.63)

As part of a continuous evolution of techniques and standards, L-Acoustics reserves the right to

change the specications of its products and the content of its document without prior notice.

Please

check

www.l-acoustics.com

on a regular basis to download the latest document and software updates.

Contact information

For information on advanced corrective maintenance:

• contact your Certied Provider or your L-Acoustics representative
• for Certied Providers, contact the L-Acoustics customer service:

[email protected]

K3i owner's manual (EN) version 1.0

Summary of Contents for K3i






















































































Search results

Summary of Contents for K3i

Reviews:

Related manuals for K3i

Brands by name

Popular brands

L-Acoustics K3i, Owner'S Manual

Search results

Summary of Contents for K3i

Reviews:

Related manuals for K3i

Brands by name

Popular brands