L-Acoustics K3i, Owner'S Manual

Page: 37 / 85

Rigging procedures
Rigging procedures
General principles
This introduction provides general principles applicable for all congurations.
Screws
Rigging screws
Only use the rigging screws provided by L-Acoustics.
Do not use the placeholder screws for rigging.
Always remove the relevant placeholder screws before securing the rigging plates.
A
C
B
C
B
A
Risk of acoustic leaks
Do not remove the placeholder screws from the bottom rear inserts (A, B or C) that are not used.
rigging accessory inter-element angles used insert
0.25°, 3° C
2°, 5°, 10° B
K3i-LINK (connecting from an
enclosure below) / KARAIIi-
DOWNK3i
1°, 4°, 7.5° A
K3i-RIGBAR — B
K3i-TILTBRACKET 5°, 2.5°, 0°, -2.5°, -5°, -7.5°, -10°, -12.5°, -15° A
It is recommended to use the rigging report from Soundvision to prepare the enclosures.
K3i owner's manual (EN) version 1.0 37