Kyocera TASKalfa 550c, Software Installation Manual

Page: 22 / 184

1 OVERVIEW
20 Setting up NetWare Print Server
„
Setting up the NetWare in iPrint mode
This equipment also supports the Novell iPrint.
Using the iPrint system, you can set up the printer that can be accessed using URL from client computers. The iPrint
system is based on the NDPS architecture so that you must have NDPS installed and configured in the NetWare 6.0/6.5
server.
Before configuring the NetWare file server in NDPS mode, please confirm followings:
y
The NDPS Broker, NDPS Manager, and NDPS Printer must be created.
P.16 “Setting up the NDPS with NetWare Administrator”
y
The Novell iManager must be installed.
For more information to install the Novell iManager, please see the documentation for the Novell iManager that is
provided by Novell, Inc.
In order to set up the iPrint system, the network administrator must do the following:
1. Installing iPrint
P.20 “Installing iPrint”
2. Enabling the DNS on the Printer Services Manager
P.20 “Enabling DNS on the Printer Services Manager”
3. Enabling iPrint service
P.21 “Enabling iPrint Service”
Installing iPrint
1 Click [Novell] in the GUI screen of NetWare and select [Install].
2 Click [Add].
If the iPrint/NDPS is displayed in the list, iPrint has already been installed during the installation of NetWare. In
that case, you do not have to operate the installation for iPrint.
3 Insert the NetWare Operating System CD-ROM into your CD-ROM drive.
4
Select the “PRODUCT.Nl” file that is located in the root of the CD-ROM, and click [OK].
5
Follow the prompts to install iPrint/NDPS.
Enabling DNS on the Printer Services Manager
Before enabling DNS for the Printer Services Manager, you should add the DNS name for the Printer Services Manager to
the DNS server.
After you add the DNS to the DNS server, follow the steps below to enable the DNS on the Printer Services Manager.
1
At the server console, enter the following syntax.
NDPSM <NDPS Manager Name> /dnsname=<NDPS Manager DNS Name>