Kyocera TASKalfa 550c, Software Installation Manual

Page: 104 / 184

4 INSTALLING PRINTER DRIVERS FOR MACINTOSH
102 Installing the Printer on Mac OS X 10.2.4 to Mac OS X 10.5.x
„
Configuring the printer on Mac OS X 10.2.4 to Mac OS X 10.3.x
After you copy the PPD file to the library folder in the System Folder, you can configure the printer.
This equipment supports the following Macintosh Printing Services: LPR Printing, AppleTalk Printing, IPP Printing, and
Bonjour Printing.
y
LPR printing
When this equipment and your computer are connected over TCP/IP network, you can perform LPR printing from
Macintosh computer.
y
AppleTalk printing
When this equipment and your computer are connected over AppleTalk network, you can perform AppleTalk printing
from Macintosh computer.
y
IPP printing
When this equipment and your computer are connected over TCP/IP network, you can perform IPP printing from
Macintosh computer.
y
Bonjour printing
When this equipment and your computer are connected over TCP/IP network, you can perform Bonjour printing from
Macintosh computer.
Configuring Macintosh LPR printing
The following describes an operation on Mac OS X 10.3.x. The procedure is the same when Mac OS X 10.2.4 to 10.2.8 is
used.
1
Start the Print Center (for Mac OS X 10.2.4 to 10.2.8) or Printer Setup Utility (for Mac OS
X 10.3.x) located in the “Applications:Utilities” folder in the Boot Disk.
Mac OS X 10.2.4 to 10.2.8
Mac OS X 10.3.x
The [Printer List] dialog box appears.