Kyocera TASKalfa 550c, Software Installation Manual, Page: 50 / 184

3 INSTALLING PRINTER DRIVERS FOR WINDOWS
48 Other Installations
Other Installations
The following printing environments cannot be configured by installation using the Installer. When you want to configure
the following printing environments, see the following pages for each procedure.
P.48 “USB printing”
P.56 “Point and Print”
P.57 “IPP printing”
P.70 “Novell iPrint”
P.71 “Web Service Print”
„
USB printing
This section describes how to set up the printer drivers when this equipment is connected with USB cable.
To set up the printer drivers for USB printing, you must install the printer drivers by Plug and Play functions instead of
installing the client software using the installer in the Client Utilities CD-ROM.
The procedure to install the printer driver for USB printing by Plug and Play differs depending on the version of Windows
used.
P.48 “Windows Vista/Server 2008”
P.51 “Windows XP/Server 2003”
P.53 “Windows 2000”
y
Use a USB2.0 Hi-Speed certified cable: USB cable supporting the USB2.0 Hi-Speed mode (480 Mbps of transfer
speed) certified by the USB Implementers Forum.
y
Connect the equipment with a PC directly by the USB cable. When it is connected with a PC via a USB hub, the
equipment may not be recognized.
‰
Windows Vista/Server 2008
Installing the printer driver for USB printing by Plug and Play
You must log into Windows as a user who has the “Administrators” or “Power Users” privilege. You must log into
Windows as a user who has the “Administrators” privilege when using Windows Vista.
1 Power on this equipment and your computer.
2
Connect the USB cable to this equipment and your computer.
The [Found New Hardware] dialog box appears.
3
Click [Locate and install driver software (recommended)].
The [User Account Permission] dialog box appears.
4
Click [Continue] in the [User Account Permission] dialog box.