Kyocera TASKalfa 550c, Software Installation Manual

Page: 45 / 184

3.INSTALLING PRINTER DRIVERS FOR WINDOWS
Installing the Printer Drivers 43
3 INSTALLING PRINTER DRIVERS FOR WINDOWS
18
Click [Close].
Before using the printer driver for printing, please configure the installed options of the equipment and
department code (if required) on the printer driver. Please refer to the
Printing Guide for the instructions.
SMB printing
When you want to set up the SMB printing, you can automatically discover the MFP to configure the printer port.
It assumes using SMB printing in a small network. If you can use the Windows 2000, Windows XP, Windows Vista,
Windows Server 2003, or Windows Server 2008 as a print server, it is recommended to set up for printing via Windows
print server.
6
When the equipment is automatically found in the network, the [Devices on Network]
option is selected and the devices found are displayed in the list. Select the equipment
that you want to connect and click [OK].
The installation starts.
y
Finding devices may take long depending on your OS or network environment.
y
If the following message appears, click [Yes] to set the indicated printer driver to be the default printer driver,
or click [No] to not change the default printer driver.
y
If the following message appears, click [Install this driver software anyway] to proceed with the installation.