Kyocera TASKalfa 550c, Software Installation Manual

Page: 83 / 184

4 INSTALLING PRINTER DRIVERS FOR MACINTOSH
Installing the Printer on Mac OS X 10.2.4 to Mac OS X 10.5.x 81
Installing the Printer on Mac OS X 10.2.4 to Mac OS X 10.5.x
Install and configure the printer by the following pages:
P.81 “Installing the Macintosh PPD file”
P.84 “Configuring the printer on Mac OS X 10.5.x”
P.93 “Configuring the printer on Mac OS X 10.4.x”
P.102 “Configuring the printer on Mac OS X 10.2.4 to Mac OS X 10.3.x”
P.110 “Configuring the installable options”
„
Installing the Macintosh PPD file
This equipment supports printing from Mac OS X 10.2.4 to Mac OS X 10.5.x.
Installing the PPD file to Mac OS X
The following describes an installation on Mac OS X 10.5.x. The procedure is the same when Mac OS X 10.2.4 to 10.5.x
is used.
1 Insert the Client Utilities CD-ROM into the CD-ROM drive and open the “MacPPD:OSX”
folder.
2 Copy the GZIP file (HS_Series.dmg.gz) to the desktop.
3 Double-click the GZIP file on the desktop.
y
The Disk Image file (HS_Series.dmg) is extracted on the desktop.
y
If the installer window appears, go to step 5.
4
Double-click the Disk Image file (HS_Series.dmg).
The installer window appears.
5 Double-click the icon in the installer window.
The welcome message is displayed.
When you install the PPD file to Mac OS X 10.2.4 to 10.2.8, the [Authenticate] dialog box appears. In that case,
enter the name and password and click [OK].
6 Click [Continue].
The [Software License Agreement] window is displayed.