4.2. Cleaning
4-9
Paper Feed Unit
To avoid print quality problems due to paper dust and debris, clean the paper feed unit in
the following manner.
1.
Pull the paper feed unit release lever up and
draw the paper feed unit all the way out
until it stops.
2.
Use the supplied cleaning brush to clean the
entire length of the saw-toothed separator
located behind the transfer roller two or
three times. Store the cleaning brush some-
where safe as it will be required again in the
future.
3.
Wipe the paper dust on the registration
roller and the paper ramp using the wiper
cloth included in the toner kit.
☛
Do not touch the transfer roller (the black
roller) when wiping the paper ramp.
4.
After cleaning, securely close the paper feed
unit.
Paper Feed Unit
Release Lever
Cleaning Brush
Separator
(saw-toothed)
Transfer Roller
Paper Feed Unit
Wiper Cloth
Registration Roller [Metal]
Paper Ramp
Transfer Roller [Black]
See Note.
