5.4. Print Quality Problems
5-5
The image is smeared
Clean the charger wire
Open the printer’s side cover. Pull the green main charger wire cleaning knob slowly in and
out a few times. See
Section 4.2
.
Faint or blurred printing
Check the control panel.
If the
7RQHUýORZý7.ðëíý&OHDQýSULQWHU
message is displayed and the
indica-
tor is flashing, install a new toner kit. See
Section 4.2
.
Set the print density from the control panel to a higher level than the current setting. See
Section 2.11
.
Try changing the paper thickness setting on the Mode Select Menu. See
Section 2.3
.
Check the Ecoprint setting.
See
Section 2.15
.
