Kyocera FS-600 Installation Manual Download Page 49

Page: 49 / 83

Installing the Page Printer

The description given below is intended for service personnel.

Precautions on the Handling of Extended SIMM

Static electricity which may accumulate in the human body through walking on carpets or other such

surfaces is the enemy of SIMM loaded with many semiconductor chips. Pay attention to the following

things before installation to protect memory chips against damage from static electricity.

•

Do not remove the SIMM from their anti-static bag until immediately prior to installation.

•

Eliminate any static electricity from your body through grounding before touching the SIMM.

•

Be absolutely sure when handling the SIMM to hold them by the substrate without touching the

printed connector section.

Summary of Contents for FS-600




















































































Search results

Summary of Contents for FS-600

Reviews:

Related manuals for FS-600

Brands by name

Popular brands

Kyocera FS-600, Installation Manual

Search results

Summary of Contents for FS-600

Reviews:

Related manuals for FS-600

Brands by name

Popular brands