Kyocera FS-600 Installation Manual Download Page 42

Page: 42 / 83

Install the printer driver

Install the printer driver

A CD-ROM containing a printer driver for Windows (Windows3.1, Windows 95 and Windows NT

3.51/4.0) is supplied with this printer. Once this printer driver is installed on the computer, it is possible to

make various settings for this printer from within Windows applications. It is also possible to control

options and printing from within Windows.

For each of these operating systems, the printer driver is located in the folder on the CD-ROM. The

steps for installing this driver are given below. Read this in conjunction with the manual supplied with

Windows.

For details on how to install the printer driver under Windows NT, read the file README.TXT in the

CD-ROM's root directory.

Installing Under Windows 95

Insert the supplied CD-ROM into the CD-ROM drive of the computer.

Click on “Start” with the mouse on the Windows 95 Task Bar, and align the cursor with “Settings.”

Click on “Printers” among the items displayed.

Start Button

Summary of Contents for FS-600




















































































Search results

Summary of Contents for FS-600

Reviews:

Related manuals for FS-600

Brands by name

Popular brands

Kyocera FS-600, Installation Manual

Search results

Summary of Contents for FS-600

Reviews:

Related manuals for FS-600

Brands by name

Popular brands