Kyocera C4008, Operation Manual

Page: 182 / 312

Section 7 COPIER MANAGEMENT
7-42
MP tray settings
display ON/OFF Turn this setting ON if you want the “MP tray setting”
screen to be displayed whenever the “MP tray” key is
pressed in the “Basic” tab. On / Off Off 7-48
Paper type (Set
fixing temperature) Sets the fixing temperature for each “custom” paper type
(custom 1 – custom 8). Select “Normal” when you are used
thick paper. The setting will cause paper to be fed more
slowly than with the “Low” setting, thereby allowing greater
heat to be applied to the paper during the fixing process. Low / Normal Low 7-49
Custom paper type
for 2-sided copying Sets whether or not each custom paper type (custom 1 –
custom 8) will be available for use in 2-sided copying. On / Off On 7-50
Original set direction Designates the default setting for the original set direction. Top Edge Left Top Edge 7-51
Auto sleep time Sets the amount of time that will elapse after copying, or if
no operation is performed, before the auto sleep function
engages and turns the copier OFF.
* It is recommended that you try to set a longer time
interval before auto sleep function engages if you use the
copier frequently, and to a shorter time if there are long
intervals between use.
15 – 240 (minutes) 60 (minutes) 7-52
Auto low power time Sets the amount of time between the point that copying ends
and the energy-saving Low power mode engages.
1 – 45, 60, 90, 120,
180 and 240
(minutes) 15 (minutes) 7-53
Copy eject location Sets the location for the ejection of finished copies.
* You can select between “Top tray” and “Finisher” when
the optional Document Finisher is installed on your
copier.
Top tray
Left tray
(Finisher) Top tray 7-54
Fax eject location Sets the location for ejection of received faxes and for printed
reports.
* This setting is only available when the optional Fax Kit
and Document Finisher are installed on your copier.
Top tray
Finisher Top tray 7-55
Default operation
mode Sets which operation mode, the copy operation mode or the
fax operation mode, will be selected when the power is
turned on to the copier. Copy mode
FAX mode Copy mode 7-56
Touch panel sound
ON/OFF Sets whether or not the touch panel will emit a “beep” sound
each time a key is touched. On / Off On 7-57
Silent mode ON/OFF The copier can be switched to a silent mode, which shortens
the length of time that the laser data writing motor
continues to spin after each copy job is finished. Turn the
silent mode ON if the noise of the motor bothers you in any
way.
On / Off Off 7-58
Default setting Description
Available
settings
Factory
setting
Reference
page