KYMCO Downtown 350i, Repair Manual, Page: 549 / 616

11.Steering Downtown 350i
11-7
Grips
If you plan to replace the grips you can slice them lengthwise with a razor blade
and peel them off. To remove the grips without cutting them use a screwdriver to
open a gap between the grip and the handlebar. Spray in contact cleaner to
break up the grip cement. Use compressed air to expand the grip so it can be
easily slid off the end of the handlebar. Note the relationship between the angle
of the grip and the throttle tube so that the new grip can be installed with the
correct angle.
NOTE: Always wear safety glasses when using compressed air and never point it
directly at yourself or anyone else.
Before installing the grips to either the throttle tube or the handlebar, wipe down
the area with a brake or parts cleaner that will dry without leaving a residue.
When you are sure the area is dry apply grip cement to the bar or tube. Install the
left grip at an angle of your preference. Install the throttle grip onto the tube with
the same angle as the original grip.