Chapter 8 - SCAN Support for Finding Satellites
10911 V01.06
32
Chapter 8
SCAN Support for Finding Satellites
Several Functions are gathered together in the SCAN-function which makes looking and identifying a
satellite position easier. As soon as the
SCAN
function is selected, a submenu will appear where the
following functions can be selected: ANALYZER; SAT SCAN; SAT List.
A spectral illustration appears on the screen as soon as the analyzer is activated and then it switches
to the input connector from the LNB-supply 18V/22kHz. The SCAN function from the analyzer mode
is in the chapter „ANALYZER“ - changing over into the measurement mode is described in „SCAN“.
8.1 SAT
SCAN
This function can be choosen from the above displayed menu with the keys
SCAN
or
ENTER
. A
search cycle starts in a range from east to west where the most important satellites are tuned to the
transponder. The positions that are being tested will be shown in a distinct red window and a
reference „ searching for position“ will be shown in the MPEG window. If the satellite system can be
clearly identified out of this data stream, the adjusted position will be shown in the MPEG-window
with the level specification (view picture). The search cycle can be continued with SCAN,
discontinued with ESC, switched to analyzer mode with
ANALYZ
and changed into regular
measurement mode with
ENTER
.
