kWiet Power dgw400dm, Owner'S And Operator'S Manual

Page: 33 / 40

- 30 -
(4) Clean/Change Fuel Strainer
Cleaning
1st time: 50th hour /
2nd time and after: Every 100 hours
Replacement Every 400 hours
1) Turn the fuel lever to "CLOSE".
2) Unscrew the retainer ring
counterclockwise, and remove the cup
and the filter element.
3) Discard any dust or water inside the
cup, and clean the filter element by
blowing compressed air, or replace if
necessary.
4) Reassemble it back.
<Note>
•
Be sure to check for any contaminants on the packing, whenever reinstalling the
cup.
•
Turn the fuel line valve lever "OPEN" after assembling, and check for any leak.
Having confirmed no leak without fail, turn the fuel line valve "CLOSE".
•
Element Part No.: 15521-43161 (Kubota)
(5) Drain Water from Fuel Tank
Draining Water Every 200 hours
1) Unscrew the fuel drain plug.
2) Reinstall the drain plug, after draining water
completely.
<Note>
•
Change the packing, whenever changing oil.
•
Packing Part No.: 6C090-58961 (Kubota)
(6) Changing Coolant/Water
Draining Water Every 200 hours
(Total Coolant/Water Capacity: 4.3 liter, including sub tank cap. 0.6 liter.)
1) Open the top plate.
2) Remove the radiator cap.
3) Loosen the water drain plug.
4) After draining all the water, reinstall the
water drain plug.
5) Replace all the water in the sub tank.
6) Fill the coolant/water to the MAX level.
(to the upper edge of the inlet)
7) Reinstall the radiator cap.
8) Install the top plate back.
<Note>
•
Change the packing, whenever changing oil.
•
Packing Part No.: 6C090-58961 (Kubota)
TOP PLATE
WATER INLET
RADIATOR CAP