kWiet Power dgw400dm, Owner'S And Operator'S Manual

Page: 26 / 40

- 23 -
9. Generator Operation
2 persons can weld simultaneously.
Each person can adjust the welding current individually.
The current adjustable range by the current adjust dial, depends on the position
each of the welding output selector switch.
1) Set the selector switch, base on the application to use.
2) Adjust the current amperage by the current adjust dial, per the table below.
Welding Current at the dial position
Position Freq
MIN 1 2 3 4 5 MAX
Eco 40 60 100 140 180 220 240
50Hz 90 120 190 250 320 360 380 1 Person
Single Use
60Hz 110 140 200 260 320 380 400
50Hz 50 70 100 130 160 180 190
2 Persons Dual Use
60Hz 55 70 110 140 170 200 210
The values shown in the table are for reference only. The length and the ambient
temperature affect the value.
When the remote control box is used, the values change to some degree.
9-1. Output Range
(1) 3-Phase 380-415V Output (3-Phase 4-Wire)
Maximum output from the receptacle is 15KVA.
CURRENT ADJ. DIAL - A
CURRENT ADJ. DIAL - B
OUTPUT TERMINAL - A
OUTPUT TERMINAL - B
OUTPUT SELECTOR SWITCH
3-P RECEPTACLE