kWiet Power dgw400dm, Owner'S And Operator'S Manual

Page: 27 / 40

- 24 -
(2) 1-Phase 220-240V Output Receptacles
1-Phase 220-240V Output is available through 2 receptacle sets.
Maximum output is 3kVA for 2 receptacle sets.
9-2. Output Limitation
Please refer to the following table, because electric tools and home appliances
cannot be judged only by the rated output or the power consumption due to the
efficiency and character of the components.
Applicable Load (For reference purpose only)
Capacity (kW)
1-Phase 220-240V 3-Phase 380-415V
Loads
Receptacle total Receptacle
Electric Bulb, Heater, etc. 3.0 -
Electric Tools, etc
(Series Motor)
1.5 -
Mercury Bulb
(High Power Factor Type)
1.2 -
Submersible Pump,
Compressor, etc
(Induction Motor)
1.2 6.0
* Series Motor: Motor with brush
* Induction Motor: Brushless Motor
* The value described is "OUTPUT" for Induction Motor loads and
"POWER CONSUMPTION" for the other equipment.
<Note>
•
Be sure to use the frequency designated in the equipment incorporated in mercury
bulb or induction motor.
•
The load incorporated in motor may require bigger power than the rated power
consumption. Therefore, consult with our authorized distributor or our engineering
section to clarify.
•
When connecting to use 2 or more sets, start the load one by one, not to start them
simultaneously.
•
When switching a Mercury bulb ON again, wait for 15 minutes (about) until it cools
down.
1-P RECEPTACLE