38
Remove the Linear Universal Quad LNB
Follow the steps below to remove the linear
universal quad LNB from the antenna system
(see Figure 63).
1.
Using a 7/16" open-end wrench, disconnect
the RF1, RF2, RF3, and RF4 cables from the
LNB. To avoid stressing the cables, hold the
top of the connectors with your fingers while
loosening.
2.
Using a 2 mm Allen hex key, loosen the three
M4 set screws securing the LNB in the choke
3.
Remove the LNB from the choke feed (see
Figure 65). Set it aside for future
reinstallation.
Figure 63: Linear Universal Quad LNB RF Cable Routing
RF3 RF2
RF4
RF1
Figure 64: Set Screws
M4 Set Screw (x3)
Figure 65: Choke Feed
Choke
Feed
Continued
Installing a Circular LNB
A
Summary of Contents for TracVision TV10
Page 1: ...TracVision TV10 Installation Guide ...
Page 53: ......
