21
Connecting 9-13 SWM Receivers (13 Tuners Max)
To connect more than eight SWM devices, connect
an RF cable from the “DSWM” jack on the
TV-Hub to the “SWM” input on an appropriate
splitter (2 and 8-way SWM splitters are available
as part of the TV-Hub Expansion Kit (KVH part
no. 72-0844)).
Install up to three (total) 8-way splitters
connecting no more than a total of thirteen tuners.
Refer to the wiring example shown in Figure 32.
When wiring the receivers, be sure to keep the
number of splits to no more than two per
path.
IMPORTANT!
Figure 32: Wiring Up to 13 DIRECTV SWM Devices
Wi-Fi
LEN=1
10-30V
POWER
MAX CURRENT 9.5A
NMEA 0183
B
A
FUSE
ETHERNET
DSWM
RECEIVER
GROUND
ANTENNA
RESET
NMEA 2000
DC IN
TV-Hub
AC Power
SWM Receiver/DVR
DSWM
Maximum of two
splitters per path
Satellite In
Terminate
unused
outputs
SWM 2-way
Splitter
SWM 8-way
Splitter
SWM 8-way
Splitter
Connect any combination of
SWM receivers/DVRs that add
up to 13 or fewer tuners
Each SWM receiver = 1 tuner
Each SWM DVR = 2 tuners
If you need to receive local channels on the
119W satellite, and you want the antenna to
automatically switch between the 101W and
119W satellites, you need to use the DIRECTV
coax network. See Appendix C on
details.
IMPORTANT!
Continued
Wire the Receivers
11
Summary of Contents for TracVision TV10
Page 1: ...TracVision TV10 Installation Guide ...
Page 53: ......
