Finding the Correct Skew for Your Location
You can find the correct skew for your location by either:
A. Querying the antenna (by entering commands via
a laptop connection), or
B. Finding your location on the PAS 9 skew map.
Option A - Querying the Antenna
To find the correct skew, follow the steps below.
1. Turn on the antenna and allow the antenna to
initialize.
2. Press the center button on the ADCU until the
“Control Antenna?” screen appears.
3. Press the
ENTER
button to access the Control
Antenna Mode.
4. Press the
NEXT
button until the “Set Lat/Long?”
screen appears.
5. Follow the process shown in
“Setting Latitude and
Longitude” on page 86
to enter your position into
the antenna.
6. After you’ve entered your position, press the
NEXT
button until the “Restart Antenna?” screen
appears.
7. Press the
YES
button to restart the antenna.
8. Once the antenna has initialized, press the center
button on the ADCU until the “Get Antenna
Status?” screen appears.
9. Press the
ENTER
button to access the Antenna
Status Mode.
10. Press the
NEXT
button until the “Get Skew
Angle?” screen appears.
11. Press the
YES
button. The ADCU displays the
correct skew for the location you entered in Step 5.
3
54-0147 Addendum to Rev. K
Skew angle
65.5
Figure 3
ADCU Reports Skew Angle (Example)
Summary of Contents for KVHTRACVISION G4
Page 136: ......
