Installation
54-0147
47
Programming User-defined Satellites
The TracVision G4 satellite library has the capacity for two user-
defined satellites in case you want to track a satellite that is not
currently preprogrammed in the library. User-defined satellites
can only be configured via the ADCU’s maintenance port. To
configure a user satellite, information about the satellite must be
provided, including:
•
Satellite name
•
Satellite position (longitude)
•
Transponder information for each of the following
polarizations/frequencies:
- vertical high
- vertical low
- horizontal high
- horizontal low
OR
- right
- left
•
Transponder information includes:
- frequency
- symbol rate
- FEC code
- network ID (in hexadecimal format)
This information can be obtained from your satellite service
provider or from a number of sites on the Internet, such as
How to tell the difference between
High and Low bands:
High: 11.700 - 12.750 GHz
Low: 10.700 - 11.700 GHz
For your reference, the satellite
configuration information for the
predefined satellites is available on
our web site at
Summary of Contents for KVHTRACVISION G4
Page 136: ......
