Preparations in the field
66
Danger zone
During operation, the danger zone covers 10 m in front of and behind
the machine and 5 m to the sides.
Check the machine's danger zone before starting, during initial
operation and during operation.
Adapt the distances in relation to the machine's space requirement
and its add-on devices.
Only start the machine once the danger zone is cleared of any
persons – especially children – but also animals or objects.
In unfavourable conditions, objects could be ejected through the
machine at high speed.
Check the danger zone
Check the danger zone before driving off, folding out, and operating
the machine. Ensure sufficient visibility. Do not begin work until the
danger zone is cleared of any persons – particularly children – but
also animals or objects.
Failure to observe these instructions may result in serious or fatal
injuries.
Check the working area for objects
Ensure that there are no objects in the working area (wood, metal,
plastic, glass, etc.), which could be ejected from the machine or
could damage the machine.
Failure to observe these instructions may result in serious or fatal
injuries.
Do not remove the protective devices
The protective devices must not be removed or by-passed. Check
all protective devices before starting the machine.
Unprotected machine components can cause serious or fatal injury.
Driving and working on terrain
During work, watch out for uneven ground and/or slopes or even
pits or embankments.
Adapt the driving speed to the ground conditions.
Failure to observe these instructions may result in serious or fatal
injuries.
10
.0
0
m
5.00 m
5.00 m
10.
00 m